Aiyaz Crystal Wine Glasses

Arc Holder

How to Strike an Arc When Arc Welding

Learning how to properly strike an arc when arc welding can be quite a headache. There are a few methods to strike an arc and we will go over them here. The one thing that probably makes it the most difficult is that you cannot see what you are doing, so I strongly recommend getting an auto darkening welding helmet. It will probably be the most important investment you will make on your quest to learn how to arc weld.

The basic theory behind how to strike an arc is simple. You must make the metal of the electrode contact the metal you are welding on. It must then be immediately drawn away from the metal about 1/4 of an inch. If you do not draw it away it will simply stick to your work. If that happens a quick twist and tug will usually get it loose. If it doesn't break free on the first try you will want to squeeze the clamp on the electrode holder and pull that away. Keep in mind any time the electrode is stuck to your work, the welder is being shorted out. This will cause it to overheat much quicker, and may blow a fuse or breaker in your breaker box.

There are a few techniques on how to strike an arc, I recommend you try them all and see which is most comfortable for you. Remember, practice is the key to being a good welder. The first method is the jab method. The way this works is you position the electrode about 1/2 an inch away from your work. Then flip your helmet down. Now you want to quickly jab the rod into the work then immediately pull it back. Another method is the scratch method. This method works very much like striking a match. Just imagine the electrode is the match, and the location you wish to lay your welding bead is the striker. If you make sure to use a very quick stroke you are much less likely to have your electrode stick when using this method.

One common problem people have is that no matter what the electrode simply freezes to the work. If you are experiencing this, it most likely means that the amps need to be turned up on your welder. Try turning it up 10 amps at a time until it stops sticking. If you are having success getting the arc to start, but then it immediately goes out, you are pulling the welding rod too far away from your work. Remember, you only want to pull it back about a 1/4 of an inch.

Once you have the arc going, you need to immediately start feeding the electrode into it. The electrode will get burned up fairly quickly, so you must keep it at the correct distance to maintain the arc. When it is at the correct distance it will make a crackling noise. If you get it too far away it will be more of a popping noise with sparks flying in all directions. If it is too close you will see the arc start to go out and it will make much less noise. If the arc goes out after you have been welding a little you can restart it much easier while the metal is still molten. Simply stick the electrode back into the puddle while you can still see it glowing through your mask.

Sometimes it is necessary to have the arc start in exactly the right place. This can be difficult without an auto darkening helmet. One trick is to place a small piece of scotch tape on the metal that ends right where you want the bead to start. This way you can place the electrode on the tape with your helmet up, then drop your helmet and simply drag it off the tape.

Learning how to strike an arc can be one of the most frustrating steps in learning how to arc weld. Fortunately, once you get it down, it becomes almost natural. Learning how to arc weld is mostly a process of practice. Get yourself some scrap metal and spend a few afternoons burning up electrodes before you try to weld anything important.

If you want more help in learning how to arc weld, The Welding Bible has great welding videos, articles and a printable handbook. We can also have your welding questions answered by a real welder for no charge.

About the Author

If you are interested in learning more about arc welding. The Welding Bible has Videos, Articles and an excellent Handbook.

Arc Napkin Holder- Acrylic Clear $6.49 This Arc Napkin Holder by Umbra is made of acrylic and has a sleek design. The arc design holds napkins upright and can be used for everyday use or special events. Features: • Made of acrylic • Freestanding • Sleek design • Color: clearSize: 5" long x 4" tall x 4" wide

Arc...At This $10.49 Arc...At This

Arc $14.49 Arc

Contempo Arc Dog Treat Holder 3 inch $4.99 The Contempo Arc Dog Chew and Treat Holder is designed to provide your dog maximum entertainment by offering a durable chewing alternative combined with treat reward system that accommodates an assortment of treats and fillings. The Contempo Arc Dog Chew and Treat Holder is a must have for any active dog. Features: Durable design satisfies a dogs urge to chew Stuff with an assortment of treats and fillings Maximum entertainment by offering a durable chewing alternative combined with treat reward system Item Specifications: Sizes: 3 Inch: X-Small to Small 5 Inch: Medium to Large Color: Assorted

Contempo Arc Dog Treat Holder 5 inch $7.99 The Contempo Arc Dog Chew and Treat Holder is designed to provide your dog maximum entertainment by offering a durable chewing alternative combined with treat reward system that accommodates an assortment of treats and fillings. The Contempo Arc Dog Chew and Treat Holder is a must have for any active dog. Features: Durable design satisfies a dogs urge to chew Stuff with an assortment of treats and fillings Maximum entertainment by offering a durable chewing alternative combined with treat reward system Item Specifications: Sizes: 3 Inch: X-Small to Small 5 Inch: Medium to Large Color: Assorted

Car Mount Windshield Holder for Sony Ericsson Xperia arc $7.94 Compatible with: Sony Ericsson Xperia arc Type: Cradle & Dock Compatible Phone Manufacturer: Sony Ericsson

The Arc $29.99 The Arc - Wall Decal

Holder $1.2 Holder

Pro Series Arc Welder $436.55 Intended use: For small weld repairs on mowers, decks, and trailersDimensions: 12 inches long x 18 inches wide x 18 inches highMaterials: MetalSet Includes: A 10 foot welding cable and electrode holder, six and a half foot ground cable and Clamp

Pro Series 120V Arc Welder $241.25 This Pro Series 120V Arc Welder was deigned for construction contractors, maintenance crews, farmers or ranchers. This welder is designed for a variety of basic welding jobs. Intended use: Welds mild steel up to a .125-inch space in a single passColor: BlackMaterials: MetalDimensions: 17 inches high x 17 inches wide x 11 inches longModel No: PS07572Set IncludesWelding cableElectrode holderGrounding cableEarth clampClipping hammer/brushHelmet amperage output

Arc Light $9.49 Arc Light

Arc Of The Dawn $9.49 Arc Of The Dawn

Arc Of A Diver $6.49 Arc Of A Diver

Red Arc $15.99 Red Arc

Arc & Green $15.99 Arc & Green

Thermal Arc 95S Stick/Lift TIG Kit $910.95 The Thermal Arc 95 S Inverter is a versatile multi-process machine with stick and lift TIG capability. With up to 95 amps of welding power it delivers excellent performance on a wide variety of materials. In DC Lift TIG mode the 95 S provides 95 amps of welding power suitable for a wide range of materials from Chrome-Moly and steel tubing to general fabrication of mild and stainless steels. Delivering a superior smooth and stable arc performance down to 5 amps for the thinnest of materials. Extremely lightweight and portable yet designed to handle the toughest jobs.     Features: Perfect for home DIY hobbyist, farm/ranch, maintenance, general light duty fabrication and repairs Versatile multi-process Stick/TIG capability High 95 amp output High efficient inverter design Smooth, stable arc performance Only 10 lbs. total weight Includes: Thermal Arc 95 S Inverter welding power source Tweco WeldSkill style electrode holder with 10ft (3m) lead Tweco WeldSkill style ground clamp with 10ft (3m) lead 20 Amp adapter plug and cable TIG torch 17V style 10ft (3m) with accessories Argon regulator/flow gauge Operating manual Quick set-up DVD 4 general purpose stick electrodes

Triumphal Arc $59.99 Triumphal Arc - Wall Decal

Joan of Arc $39.99 Joan of Arc - Giclee Print

Noah's Arc $49.99 Noah's Arc - Giclee Print

Arc Welding $24.99 Arc Welding - Photographic Print

Thermal Arc 365W1003202 95S StickTig $1053 Height: 16 in. Width: 7 in. Includes: 20 Amp Adapter Plug and Cable 95S Inverter Power Source Tweco Weldskill Electrode Holder w/10 ft (3m) Lead Tweco Weldskill Ground Clamp w/10 ft (3m) Lead (4) General Purpose Stick Electrodes Quick set up DVD Operating Manual. Length: 19 in.

Curve Wall Tealight Holder - Large $64 Sleekly sculpted stainless steel arc mounts on the wall and holds a solitary tealight. Versatile, vertical design. Use a few of these ultimate modern candle holders to create a stunning light gallery. Mounting hardware included. A unique, contemporary tealight holder. Comes with a glass tealight cover. Use with our Clear Cup Tealights (120-0181).

Curve Wall Tealight Holder - Small $44 Sleekly sculpted stainless steel arc mounts on the wall and holds a solitary tealight. Versatile, vertical design. Use a few of these ultimate modern candle holders to create a stunning light gallery. Mounting hardware included. A unique, contemporary tealight holder. Comes with a glass tealight cover. Use with our Clear Cup Tealights (120-0181).

Heavy Duty Car Mount Windshield Holder with Large Suction Cup for Sony Ericsson Xperia arc $11.97 This Fosmon's heavy duty car mount with suction cup is the ideal and practical mounting system for your smartphone. The holder can easily be mounted on the car dashboard / centre console or be firmly attached to the windshield with the powerful suction cup. The revolver can be rotated to any orientation that you like and what's more, there is soft cushion attaches on the holder so you don't have to worry about scratches when using this car mount. Type: Cradle & Dock Compatible Phone Manufacturer: Sony Ericsson